 |
 |
 |
||
FUKUI |
HITACHI ZOSEN FUKUI |
HITACHI ZOSEN FUKUI |
|
|
| Transfer Press | Blanking Press | Transfer Press ( withTransfer Unit ) |
||
| Suspension Point : 2 | Suspension Point : 4 | Suspension Point : 4 | ||
| Mfg Year : 1983 | Mfg Year : 2013 | Mfg Year : 2012 | ||
| Model : MTE-500 | Model : BL-600 | Model : TFE-16000 | ||
| Capacity : 500 ton | Stroke : 300 mm | Capacity : 1600 ton | ||
| Stroke : 400 mm | SPM : 15-80 | Stroke : 800 mm | ||
| SPM : 10-27 | Die Height/Adjust : 950/300 mm | SPM : 10-30 | ||
| Die Height : 800 mm | Slide area : 3210 x 2000 mm | Die Height/Adjust : 1100/200 mm |
||
| Slide Adj : 50 mm | Bolster area : 3000 x 2000 x 200 mm |
Slide area : 5000 x 2300 mm | ||
| Slide area : 3100 x 1500 mm | Max. Upper die Wt : 20 ton | Bolster area : 5200 x 2200 x 300 mm |
||
| Bolster area : 3100 x 1500 mm | M.Bolster : 2 set_front exit T_cross |
Max. Upper die Wt : 25 ton | ||
| Moving Bolster : Front-rear x 2 set |
Orii Coil Feeding Line | No. of stage/stage Pitch : 5/1000 mm |
||
| Die Cushion : | Width : 400-1600 mm | Die Cushion (1st stage only) | ||
| 1-2 stage/12 tons each | Thickness : 0.4-3.2 mm | Capacity:23-120 ton (adjustable) | ||
| 3-5 stage/8 tons each | Coil Weight : 30 ton | Cushion Type: 1-pad-1-cylinder | ||
| Cushion Pad : 500x1000 x 5 set | Coil Cart with Lifting Unit : 2 sets | Cushion Stroke : 250 mm (Effective) |
||
| Cushion stroke : 200 mm | Auto change of coil carts | Pad area : 1040 x 1800 mm | ||
| Moving bolster : Front-Reat exit x 2 sets |
||||
| Q'ty available : 1 set | Q'ty available : 1 sets. | Q'ty available : 1 sets. | ||
| M/C Location : Thailand | M/C Location : Thailand |
M/C Location : Thailand |
||